適用種類 Applicable type
●電氣控制箱 ●激光加工控制箱 ●電火花加工機械控制箱 ●通信設備
●Electric control cabinet ●Control cabinet of laser machine ●Electric spark control cabinet of machine ●Communication equiment
特性與功能 Features and Functions
●密閉型設計，內外空氣隔絕，防止外部塵埃、油物、濕氣等進入箱內
●采用壓縮機強制冷卻，控制箱內溫度和濕度
●提高電箱內電氣元件使用壽命
●Enclosed desing to isolate the air from outside to prevent from dust, oil mist, moisture
●Use air compressor to control temperature and humidity in the cabinet
●Prolong service life of control cabinet


備注 Remark
●制冷能力是在環境溫度35℃，電箱內溫度35℃的條件下測得。●Cooling capacity base on the ambient temperature 35℃, inner cabinet temperature 35℃.
●必須保證冷氣機通風良好，否則會影響制冷效果甚至發生故障。 ●Marking sure that airiness is good to make cooling effect better.
●定期清理過濾網，建議一月一次。 ●Cleaning filter net once a month.
●溫控器出廠時已設定工作溫度范圍在30 33℃之間，嚴禁調低工作溫度。 ●The working teperature of thermostat has been a djusted within 30 33℃ before dispatch.
●冷氣機應垂直安裝，傾斜度＜5°。 ●The cooler may be installed vertically. The inclination＜5°.
●冷氣機使用環境溫度在38℃以下，無粉末，無腐蝕性氣體，周圍無熱源的場所�！馮he ambient temperature should be less 38℃. The cooler should be away from dust and corrosive gas as well as heat source.
●參數表內為本公司標準機型，本公司接受客戶特殊訂貨。●Chiller tyhpe on the above table is standard, speical order on requst.